Host Security Operation Technical Specification for Mixing Plant
1. Check the material specifications are consistent with the concrete mixer performance, exceeding the scope of the license may not be used.
2. Check the empty work before the operation, check the mixing tube or stirring the leaves turn, the working device operation, braking only after confirming normal operation.
3. job safety matters:
(1) When the feed is forbidden to hand and head to view or Tanmo stretching between the feed hopper and frame conditions, not by hand or tool operation and other material into the blender chops discharge tube.
(2) Increased hopper is prohibited under and walk through their work, you must fight with the chain anchored to the bottom of the pit when the feed hopper to be set cushions, cleaning material pit.
(3) Must be within the original concrete mixer after the first full discharge to add new material. And should be charging stations in operation (except reverse the material outside), shall not stop or start the blender halfway full load.
4 Notes after the job
(1) Conduct a comprehensive cleaning operations to deal with the mixer, the operator enters the cylinder For cleaning, you must turn off the power, let someone outside the guardianship, or should remove the fuse box and lock knife, before entering.
(2) Haomei mixing plant manufacturers to remind you that after the job should hopper landing pit, as it must be raised by a chain anchored.
